GM: Electra/Park Avenue/Ninety-Eight 1990-1993

Headlight Switch

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Fig. 1 Headlight function switches-1990 Electra/Park Avenue



Click image to see an enlarged view

Fig. Fig. 2 Headlight switch mounting-199-93 Park Avenue



Click image to see an enlarged view

Fig. Fig. 3 Headlight switch mounting-1990 Ninety-Eight



Click image to see an enlarged view

Fig. Fig. 4 Headlight switch mounting-1991-93 Ninety-Eight

All Models Except 1991-93 Park Avenue

  1. Refer to the Air Bag section at the beginning of this Section, and disarm the Air Bag system.
  2.  
  3. Remove the trim panel around the headlight switch.
  4.  
  5. Remove the switch retaining screws. The various function switches are separately serviceable on Buick.
  6.  
  7. Pull the switch out, disconnect the connector and remove the switch assembly(s).
  8.  

To install:

  1. Connect the connector and install the switch. Secure with the screws.
  2.  
  3. Install the trim panel.
  4.  
  5. Refer to the Air Bag section at the beginning of this Section, and arm the Air Bag system.
  6.  
  7. Inspect the headlight switch for proper operation.
  8.  

1991-93 Park Avenue
  1. Remove the door trim panel.
  2.  
  3. Disconnect the headlight switch connector.
  4.  
  5. Remove the retaining screws from the back of the trim panel.
  6.  
  7. Remove the switch from the trim panel.
  8.  

To install:

  1. Install the switch to the door panel.
  2.  
  3. Position the door panel and connect the connector.
  4.  
  5. Inspect the headlight switch for proper operation.
  6.  
  7. If all is satisfactory, install the door trim panel.
  8.  

 
label.common.footer.alt.autozoneLogo