GM Firebird 1967-1981 Repair Guide

Dome Light Bulb

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

Click image to see an enlarged view

Fig. Fig. 1: When replacing the dome light bulb, gently pry the lens cover off of the housing ...



Click image to see an enlarged view

Fig. Fig. 2: ... then pull the bulb from between the two metal contacts



Click image to see an enlarged view

Fig. Fig. 3: Sample diagram how to read and interpret wiring

This is a general procedure and applies to all models and types covered by the guide. A few steps may need to be slightly altered to comply with your particular vehicle.

  1. Disconnect the negative battery cable.
  2.  
  3. Using a small prytool, remove the lens from the assembly.
  4.  
  5. Remove the light bulb by pulling it out from between the two metal contacts.
  6.  
  7. Installation is the reverse of the removal procedure. During installation, make sure that the light bulb contacts are clean and free of corrosion.
  8.  

 
label.common.footer.alt.autozoneLogo