GM Firebird 1982-1992 Repair Guide

Throttle Position Sensor (TPS)

Print

REMOVAL & INSTALLATION



  1. Remove the air cleaner.
  2.  
  3. Disconnect the electrical connector.
  4.  
  5. Remove the TPS attaching screws and lockwashers.
  6.  
  7. Remove the TPS.
  8.  

To install:
  1. Install the throttle position sensor. Make sure the TPS pickup lever is located above the tang on the throttle actuator lever.
  2.  
  3. Install the TPS attaching screws.
  4.  
  5. Adjust the TPS voltage.
  6.  
  7. Reconnect the electrical connector.
  8.  
  9. Install the air cleaner.
  10.  

 
label.common.footer.alt.autozoneLogo