GM Firebird 1982-1992 Repair Guide

Control Head

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the air conditioning/radio console trim plate.
  4.  
  5. Remove the control head retaining screws.
  6.  
  7. Pull the assembly forward, disconnect the electrical and vacuum connections. Remove the temperature control cable.
  8.  
  9. Remove the control assembly from the vehicle.
  10.  

To install:
  1. Position the control head into the vehicle.
  2.  
  3. Install the temperature control cable.
  4.  
  5. Connect the electrical and vacuum connections and push the assembly rearward.
  6.  
  7. Install the control head retaining screws.
  8.  
  9. Install the air conditioning/radio console trim plate.
  10.  
  11. Connect the negative battery cable.
  12.  



Click image to see an enlarged view

Fig. Fig. 1: Control head assembly



Click image to see an enlarged view

Fig. Fig. 2: Control head assembly attachments

 
label.common.footer.alt.autozoneLogo