GM Firebird 1982-1992 Repair Guide

Rear Liftgate Pull-Down Unit

Print

REMOVAL & INSTALLATION



See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Pull-down lock unit

  1. Open the rear hatch. Disconnect the negative battery cable.
  2.  
  3. Remove the rear trim panel. Disconnect the electrical connector and remove the attaching screws.
  4.  
  5. Disconnect the unit lock cable connection from the lock cylinder.
  6.  
  7. Remove the unit.
  8.  
  9. Installation is the reverse of the removal procedure. Torque the screws to 18 ft. lbs. (24 Nm).
  10.  

ADJUSTMENT



Adjust the unit as necessary for proper lock striker engagement.

 
label.common.footer.alt.autozoneLogo