GM Firebird 1982-1992 Repair Guide

Back-up Light Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery terminal from the battery.
  2.  
  3. At the left-rear of the transmission, the back-up light switch is threaded into the transmission case. The speed sensor is held in with a separate bracket. Disconnect the electrical connector from the back-up light switch.
  4.  
  5. Remove the back-up light switch from the transmission.
  6.  
  7. To install, reverse the removal procedures. Coat the threads with Teflon® tape. Please refer to the torque chart for specifications. Place the gear shift lever in the reverse position and check that the back-up lights work.
  8.  

 
label.common.footer.alt.autozoneLogo