GM Firebird 1982-1992 Repair Guide

Track Bar Brace

Print

REMOVAL & INSTALLATION



  1. Raise the rear of the vehicle, place jackstands under the rear axle, then lower the jack so that the stands are supporting all of the weight.
  2.  
  3. Remove the heat shield screws from the track bar brace.
  4.  
  5. Remove the three track bar brace-to-body brace screws.
  6.  
  7. Remove the track bar-to-body bracket fasteners and remove the track bar brace.
  8.  

To install:
  1. Place the track bar brace into position.
  2.  
  3. Install the track bar-to-body bracket fasteners.
  4.  
  5. Install the three track bar brace-to-body brace screws.
  6.  
  7. Install the heat shield screws to the track bar brace.
  8.  
  9. Lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo