GM Full-Size Trucks 1970-1979 Repair Guide

Control Head

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the radio, as outlined in this section.
  4.  
  5. Remove the instrument panel bezel.
  6.  
  7. Disconnect the control head from the dash.
  8.  
  9. Lower the control head from the dash, without kinking the cable, and disconnect the cable, vacuum harness and electrical harness.
  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo