GM Full-Size Trucks 1970-1979 Repair Guide

Parking Lamp Housing

Print

REMOVAL & INSTALLATION



  1. Remove parking lamp lens screws and remove the lens.
  2.  
  3. Remove lamp housing retaining screws and pull housing forward.
  4.  
  5. Disconnect parking lamp wiring harness from housing by rotating bulb socket counterclockwise.
  6.  
  7. Connect wiring harness to new housing by inserting bulb socket into housing and rotation clockwise.
  8.  
  9. Install bulb if removed during disassembly. Install lens and retaining screws.
  10.  

 
label.common.footer.alt.autozoneLogo