GM Full-Size Trucks 1980-1987 Repair Guide

Blower Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument panel bezel.
  4.  
  5. Remove the control to instrument panel screws and allow control to rest on top of the radio.
  6.  
  7. Remove the blower switch to control screws and disconnect the electrical harness connector.
  8.  
  9. Disconnect the control head from the dash.
  10.  
  11. Lower the control head from the dash, without kinking the cable, and disconnect the cable, vacuum harness and electrical harness.
  12.  
  13. Reverse the above to install.
  14.  

 
label.common.footer.alt.autozoneLogo