GM Full-Size Trucks 1980-1987 Repair Guide

Printed Circuit Board

Print

REMOVAL & INSTALLATION



  1. Remove the instrument cluster as outlined previously.
  2.  
  3. Remove all instrument cluster lamp bulb assemblies.
  4.  
  5. Remove the laminated circuit board retaining screws.
  6.  
  7. Remove the circuit board.
  8.  
  9. To install reverse the removal procedure. Be sure to reinstall all of the circuit board retaining screws since these provide ground to the gauge circuits.
  10.  

 
label.common.footer.alt.autozoneLogo