GM Full-Size Trucks 1980-1987 Repair Guide

Speedometer Cable

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery terminal.
  2.  
  3. Disconnect the cable from the back of the speedometer.
  4.  
  5. Remove the old core by pulling it out at the speedometer end. If the core is broken, it will be necessary to remove the broken half from the transmission end of the cable.
  6.  
  7. Lubricate the entire length of the core before installation.
  8.  
  9. Installation is the reverse of removal.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Various speedometer cable routings

 
label.common.footer.alt.autozoneLogo