GM Full-Size Trucks 1980-1987 Repair Guide

Headliner

Print

REMOVAL & INSTALLATION



Pick-Up

See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: Headliner and trim moldings, Pick-up

  1. Remove the windshield upper garnish molding screws and the molding.
  2.  
  3. Remove side window garnish molding screws and the molding.
  4.  
  5. Remove the windshield side garnish molding screws and the molding.
  6.  
  7. Remove the back windshield garnish molding screws and the molding.
  8.  
  9. Remove the headliner being careful not to bend or crease it.
  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

Crew Cab and Jimmy/Blazer

See Figures 2 and 3

Click image to see an enlarged view

Fig. Fig. 2: Headliner and trim moldings, Crew cab



Click image to see an enlarged view

Fig. Fig. 3: Headliner and trim moldings, Blazer and Jimmy

  1. Remove the windshield upper garnish molding screws and the molding.
  2.  
  3. Remove side window garnish molding screws and the molding.
  4.  
  5. Remove the windshield side garnish molding screws and the molding.
  6.  
  7. Remove the back windshield garnish molding screws and the molding.
  8.  
  9. Remove the rear lock pillar garnish molding screws and the molding.
  10.  
  11. Remove the sun visor retaining screws and the sun visor.
  12.  
  13. Remove the headliner being careful not to bend or crease it.
  14.  
  15. Installation is the reverse of the removal procedure.
  16.  

Suburban

See Figure 4