GM Full-Size Trucks 1980-1987 Repair Guide

Interior Trim Panels

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

Front Trim
  1. Remove screws from sill plate and lift plate to remove.
  2.  
  3. Remove five retaining screws from kick panel and remove panel.
  4.  
  5. Remove two retaining screws from the outer instrument panel filler panel. Pull downward and out to remove the panel.
  6.  
  7. Remove the five retaining screws from the cross windshield garnish molding and remove the molding.
  8.  
  9. Remove two retaining screws from the windshield side garnish molding. Pull rearward and out to remove the molding.
  10.  
  11. Installation is the reverse of removal.
  12.  



Click image to see an enlarged view

Fig. Fig. 1: Kick panel removal



Click image to see an enlarged view

Fig. Fig. 2: Interior windshield trim



Click image to see an enlarged view

Fig. Fig. 3: Instrument panel filler trim

Front Lock Pillar Garnish Molding
  1. Remove six retaining screws from front lock pillar garnish molding.
  2.  
  3. Remove upper shoulder belt anchor bolt.
  4.  
  5. Remove front lock pillar garnish molding by pulling outward and down.
  6.  
  7. Installation is the reverse of removal.
  8.  

Rear Lock Pillar Molding
  1. Remove the two retaining screws and pull outward to remove.
  2.  
  3. Installation is the reverse of removal.
  4.  

Rear Side Bottom Trim Panels

On the Suburban, the rear trim panel is removed by removing the retaining screws and lifting the panel up to remove.

Rear Side Top Trim Panel

SUBURBAN
  1. Remove the rear side bottom panel by removing the retaining screws and lifting the panel up to remove.
  2.  
  3. Remove the retaining screws to upper rear door headliner molding.
  4.  
  5. Remove the upper rear side door garnish molding retaining screws.
  6.  
  7. Remove the rear side top trim panel retaining screws and remove the panel.
  8.  
  9. Installation is the reverse of the removal procedure
  10.  

 
label.common.footer.alt.autozoneLogo