GM Full-Size Trucks 1980-1987 Repair Guide

Power Door Lock Motor

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the door trim panel.
  4.  
  5. Disconnect the connector from the electric door lock motor.
  6.  
  7. Remove the door lock motor screws.
  8.  
  9. Detach the motor from the lock rod. Slide the rubber mount at the top of the motor off of the door lock rod.
  10.  
  11. Remove the motor from the door.
  12.  

To install:
  1. Attach the motor to the door.
  2.  
  3. Attach the lock rod to the motor.
  4.  
  5. Reconnect the electrical connector.
  6.  
  7. Reconnect the negative battery cable and check the lock functions correctly.
  8.  
  9. Install the door trim panel.
  10.  

 
label.common.footer.alt.autozoneLogo