GM Full-Size Trucks 1980-1987 Repair Guide

Speakers

Print

REMOVAL & INSTALLATION



Front Speakers
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the upper four screws on the instrument cluster bezel.
  4.  
  5. Remove the instrument panel pad screws and remove pad.
  6.  
  7. Remove the speaker to dash panel screws.
  8.  
  9. Lift up on speaker, disconnect speaker wiring harness and then remove speaker.
  10.  
  11. To install, reverse the procedure.
  12.  

Rear Speakers
  1. Disconnect the negative battery cable.
  2.  
  3. Remove four screws securing speaker grille to trim panel and remove grille.
  4.  
  5. Remove the two screws that secure speaker and then remove the grille.
  6.  
  7. To install, reverse the procedure.
  8.  

 
label.common.footer.alt.autozoneLogo