GM Full-Size Trucks 1980-1987 Repair Guide

Wiper Washer Pump & Reservoir

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the harness connectors.
  4.  
  5. Disconnect the fluid tube at the motor.
  6.  
  7. Remove the two reservoir retaining screws.
  8.  
  9. Remove the motor from the reservoir.
  10.  
  11. To install, reverse the procedure.
  12.  



Click image to see an enlarged view

Fig. Fig. 1: Pliers may be used to gently aim the washer nozzles



Click image to see an enlarged view

Fig. Fig. 2: A pin or needle may be used to clean a clogged nozzle



Click image to see an enlarged view

Fig. Fig. 3: Troubleshooting Basic Windshield Wiper Problems

 
label.common.footer.alt.autozoneLogo