GM Full-Size Trucks 1988-1998 Repair Information

Brake Light Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Disable the SIR system (if equipped).
  4.  
  5. Remove the clip (R/V Series) or unclip the switch (C/K Series) and unplug the electrical connector from the brake light switch.
  6.  
  7. Remove the switch.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo