GM Full-Size Trucks 1988-1998 Repair Information

Relieving Fuel System Pressure

Print

Fuel pressure gauge J 34730-1A or its equivalent is required to perform this procedure

  1. Disconnect the negative battery cable.
  2.  
  3. Loosen the fuel filler cap to relieve fuel tank pressure.
  4.  
  5. Engage the fuel pressure gauge to the fuel pressure connection. Wrap a shop towel around the fitting while connecting the gauge to prevent spillage.
  6.  
  7. Install the bleed hose into an approved container and open the valve to bleed the system. The system is now safe for servicing.
  8.  
  9. Drain any fuel remaining in the gauge into an approved container.
  10.  

 
label.common.footer.alt.autozoneLogo