GM Full-Size Trucks 1988-1998 Repair Information

Pushrod (Engine Side) Cover

Print

REMOVAL & INSTALLATION



This applies to 4.8L engines only.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the oil dipstick tube.
  4.  
  5. Remove the distributor.
  6.  
  7. Remove the side cover bolts.
  8.  
  9. Carefully pry off the side cover.
  10.  
  11. Remove all traces of the old gasket.
  12.  
  13. Installation is the reverse of removal. Use sealer on both sides of the gasket. Tighten the bolts to 80 inch lbs. (9 Nm).
  14.  

 
label.common.footer.alt.autozoneLogo