GM Full-Size Trucks 1988-1998 Repair Information

CD Player

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the accessory trim plate.
  4.  
  5. Disconnect any electrical leads.
  6.  
  7. Release the retainers using a small screwdriver and pull out the unit.
  8.  
  9. Unplug all electrical connections and remove the unit.
  10.  

To install:
  1. Attach all electrical connections to the unit.
  2.  
  3. Slide the unit into position.
  4.  
  5. If the unit is not retained by screws, push the unit in until the retainers are fully engaged.
  6.  
  7. If the unit is retained with screws, install and tighten the screws.
  8.  
  9. Install the trim plate.
  10.  
  11. Connect the battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo