GM Full-Size Trucks 1988-1998 Repair Information

Cab Mount Bushings

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Raise the side of the truck to be worked on, with a floor jack.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Cab mount bushing locations

  1. Place jackstands under the cab on that side.
  2.  
  3. Remove the bolt, bushing retainer and lower bushing.
  4.  
  5. Slowly and carefully, lower the truck so that the jackstand raises the cab. Replace the upper bushing.
  6.  
  7. Raise the truck and install the lower bushing, retainer and bolt. Tighten the bolt to 55 ft. lbs. (70 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo