GM Full-Size Trucks 1988-1998 Repair Information

Outside Mirror

Print

REMOVAL & INSTALLATION



Standard Type

See Figure 1

  1. If you are replacing an electrically operated mirror it may be necessary to remove the trim panel upper extension.
  2.  



Click image to see an enlarged view

Fig. Fig. 1: Outside standard type mirror

  1. Remove the mirror to bracket screw and remove the mirror from the door.
  2.  
  3. Remove the bracket to door bolts and remove the bracket and gasket from the vehicle.
  4.  
  5. Disengage the electrical connector.
  6.  
  7. Installation is the reverse of removal.
  8.  

Below Eyeline Type

See Figure 2



Click image to see an enlarged view

Fig. Fig. 2: Outside mirror-below eyeline type

  1. Remove the mirror cover screw and lift the cover and pivot the mirror towards the window.
  2.  
  3. Remove the mirror to door bolts and remove the mirror and seal from the door.
  4.  
  5. To install, position the mirror and seal to the door and install the retaining bolts.
  6.  
  7. Pivot the mirror away from the window, and lower the mirror cover.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo