GM Full-Size Trucks 1988-1998 Repair Information

Roof

Print

REMOVAL & INSTALLATION



This applies to 1988-91 Blazer/Jimmy only.

  1. Lower the rear window.
  2.  
  3. Remove the roof inner edge trim panels.
  4.  
  5. Remove the roof-to-body attaching bolts.
  6.  
  7. Using an assistant, break loose the roof from the insulating strips. Carefully lift the roof from the truck.
  8.  


CAUTION
It is very heavy and awkward! Be careful to avoid flexing the roof or letting it crash into anything!

  1. Without flexing the top, carefully place it on two 2×4 pieces of lumber.
  2.  
  3. Installation is the reverse of removal. Replace any damaged insulation.
  4.  

 
label.common.footer.alt.autozoneLogo