GM Full-Size Trucks 1988-1998 Repair Information

Step Side Rear Fenders

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove the step pads.
  2.  
  3. Remove the fender-to-brace fasteners.
  4.  
  5. Remove the brace-to-support bolts.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Rear stepside fender

  1. Remove the fender-to-support screws.
  2.  
  3. Remove the tail light side panel screws.
  4.  
  5. Remove the fender-to-bracket screws.
  6.  
  7. Remove the fender-to-side panel screws.
  8.  
  9. Lift off the fender.
  10.  
  11. Install the fender and tighten the fender-to-bracket screw to 18 ft. lbs. (24 Nm) and all other screws to 13 ft. lbs. (17 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo