GM Full-Size Trucks 1988-1998 Repair Information

Front Parking Lamp Assembly

Print

REMOVAL & INSTALLATION



1988-91 R/V Series
WITH TWO HEADLIGHTS
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the four bezel retaining screws and remove the bezel.
  4.  
  5. Remove the three parking lamp retaining screws. Unplug the electrical connector and remove the parking lamp. Remove the bulb.
  6.  
  7. Installation is the reverse of removal.
  8.  

WITH FOUR HEADLIGHTS
  1. Remove the radiator grille.
  2.  
  3. Unplug the electrical connector from the parking lamp assembly.
  4.  
  5. Remove the two nuts at the top of the housing and lift it up from the radiator grille. Remove the bulb.
  6.  
  7. Installation is the reverse of removal.
  8.  

Except 1988-91 R/V Series

See Figure 1

  1. Remove the parking lamp assembly retaining screws.
  2.  
  3. Remove the parking lamp assembly.
  4.  
  5. Twist the bulb holder and pull the bulb and holder from the lamp.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Front parking lamp and side marker assemblies

  1. Twist the bulb and remove it from the holder.
  2.  

To install:
  1. Twist the new bulb into the lamp and tighten the retaining screws.
  2.  

 
label.common.footer.alt.autozoneLogo