GM Full-Size Trucks 1988-1998 Repair Information

Tail, Stop and Back-Up Lamp Bulbs

Print

REMOVAL & INSTALLATION



1988-91 R/V Series
  1. Remove the lens-to-housing attaching screws. Remove the lens.
  2.  
  3. Replace the bulb(s).
  4.  
  5. Installation is the reverse of removal.
  6.  

Except 1988-91 R/V Series

See Figures 1 through 6



Click image to see an enlarged view

Fig. Fig. 1: Remove the lamp assembly retaining screws



Click image to see an enlarged view

Fig. Fig. 2: Pull the lamp assembly from the truck

  1. Lower the tailgate.
  2.  
  3. Remove the lamp assembly retaining screws.
  4.  
  5. Pull the lamp assembly from the truck and disconnect the wiring.
  6.  
  7. Remove the bulb holder fasteners.
  8.  
  9. Remove the bulb(s) from the lamp.
  10.  
  11. Install the bulb, connect the wiring and install the lamp.
  12.  



Click image to see an enlarged view

Fig. Fig. 3: Disengage the electrical connection



Click image to see an enlarged view

Fig. Fig. 4: Unfasten the bulb holder retainers



Click image to see an enlarged view

Fig. Fig. 5: Remove the bulb holder



Click image to see an enlarged view

Fig. Fig. 6: Pull this type of bulb from the socket

 
label.common.footer.alt.autozoneLogo