GM Full-Size Trucks 1988-1998 Repair Information

Shift Linkage

Print

REMOVAL & INSTALLATION



  1. Remove the cotter pin and the washer.
  2.  
  3. Disconnect the shift rod from the control lever and remove the retainer and washer.
  4.  
  5. Disconnect the shift rod from the shift lever and remove the nuts and swivel.
  6.  

To install:
  1. Install but do not tighten the nuts and swivel.
  2.  
  3. Connect the shift rod to the shift lever.
  4.  
  5. Install the washer and new retainer.
  6.  
  7. Connect the shift rod to the control lever and install the washer and new retainer.
  8.  
  9. Adjust the shift linkage as outlined in this section.
  10.  

 
label.common.footer.alt.autozoneLogo