GM Full-Size Trucks 1988-1998 Repair Information

Brake Shoes

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Remove the drum. Refer to the procedure in this section.
  2.  
  3. Remove the bolts and washers.
  4.  
  5. Disconnect the support plate and shoe kits.
  6.  
  7. Remove the springs and shoe kits.
  8.  

To install:
  1. Connect the shoe kits to the support plate.
  2.  
  3. Install the springs, support plate and shoe kits.
  4.  
  5. Install the bolts and washers. Tighten the washers to 77 ft. lbs. (105 Nm).
  6.  
  7. Install the drum. Refer to the procedure in this section.
  8.  



Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the rear shoe assembly for the parking brake

 
label.common.footer.alt.autozoneLogo