GM Full Size Vans 1967-1986 Repair Guide

Rear Door Striker

Print

REMOVAL & INSTALLATION



  1. Remove the striker-to-door frame bolts.
  2.  
  3. Remove the striker from the door frame.
  4.  
  5. Remove the spacer (if equipped).
  6.  
  7. Install in the reverse order of removal.
  8.  

ADJUSTMENT



Adjust the striker to door latch clearance, so that there is 0.172 in. (4.37mm) between the striker and the door latch when the door is in the secondary latch position (the door is latched but not fully closed). An 11 / 16 in. (17.46mm) diameter drill bit may be used to gauge this clearance.

 
label.common.footer.alt.autozoneLogo