GM Full Size Vans 1987-1997 Repair Guide

Electric Window Motor

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the trim panel and water deflector.
  4.  
  5. Remove the window regulator for clearance (if necessary).
  6.  
  7. Disengage the wiring connector to the window motor.
  8.  
  9. Remove the motor to door frame retainers.
  10.  
  11. Remove the window motor.
  12.  



Click image to see an enlarged view

Fig. Fig. 1: Power window motor mounting

To install:
  1. Install the motor and tighten the retainers.
  2.  
  3. Engage the electrical connection.
  4.  
  5. If removed, install the regulator.
  6.  
  7. Install the water deflector and trim panel.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo