GM Full Size Vans 1987-1997 Repair Guide

Back-up Light Switch

Print

REMOVAL & INSTALLATION



See Figure 1

  1. Disconnect the negative battery cable.
  2.  
  3. Raise the vehicle and support it safely.
  4.  
  5. Unplug the electrical connector at the switch.
  6.  
  7. Unscrew the switch from the transmission case.
  8.  
  9. Installation is the reverse of removal.
  10.  



Click image to see an enlarged view

Fig. Fig. 1: Back-up light switch - NVG 4500 transmission

 
label.common.footer.alt.autozoneLogo