GM Full Size Vans 1987-1997 Repair Guide

Parking Brake Lever Pin-Up Procedure

Print

See Figure 1



Click image to see an enlarged view

Fig. Fig. 1: Insert a scribe or nail into the lever to hold the tension at its full reset position - 1996-97 models

This procedure is required on 1996-97 models only.

  1. Remove the left kick panel.
  2.  
  3. Place the parking brake lever in the full upward position.
  4.  
  5. Raise the vehicle and support it with jackstands with a helper in the vehicle.
  6.  
  7. Pull the front of the cable strand rearward until the parking brake lever drum reaches its full reset position.
  8.  
  9. Insert a scribe or nail into the lever to hold the tension to its full reset position.
  10.  

 
label.common.footer.alt.autozoneLogo