GM Grand Am/Achieva/Calais/Skylark/Somerset 1985-98

Blower Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the heater/air conditioner control assembly as outlined earlier in this section.
  4.  
  5. Remove the blower switch knob.
  6.  
  7. Detach the switch electrical connector.
  8.  
  9. Unfasten the blower switch attaching screws, then remove the blower switch.
  10.  

To install:
  1. Install the blower switch, then secure using the attaching screws. Tighten the screws to 9 inch lbs. (1 Nm).
  2.  
  3. Attach the blower switch electrical connector.
  4.  
  5. Install the control assembly as outlined earlier in this section.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo