GM Grand Am/Achieva/Calais/Skylark/Somerset 1985-98

Dome Light

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Depending on the design, carefully pry the lens from the housing or unfasten the retaining screws and remove the lens.
  4.  
  5. Remove the bulb from its socket.
  6.  
  7. Insert a flat bladed tool into the U-shaped cutout around each integral fastener in the base plate and pry the fastener downward to release it from the roof bow.
  8.  
  9. Disconnect the electrical wiring from the lamp, then remove the base plate.
  10.  

To install:
  1. Position the lamp base plate housing and snap into position.
  2.  
  3. Attach the wiring and position the fasteners of the lamp into the holes in the roof bow. Press the lamp into place.
  4.  
  5. Install the bulb in the socket.
  6.  
  7. Fasten the lens by pushing it into position or securing with the retaining screws.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo