GM Grand Am/Achieva/Calais/Skylark/Somerset 1985-98

Back-up Light Switch

Print

REMOVAL & INSTALLATION



See Figures 1 and 2

  1. Disconnect the negative battery cable.
  2.  
  3. Detach the back-up light connector.
  4.  
  5. Remove the back-up light switch assembly from the transaxle.
  6.  

To install:
  1. Using a suitable pipe sealant compound, install the back-up light switch assembly. Tighten to 24 ft. lbs. (33 Nm).
  2.  
  3. Attach the back-up light switch connector.
  4.  
  5. Connect the negative battery cable.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Back-up light switch location-Muncie transaxles



Click image to see an enlarged view

Fig. Fig. 2: Back-up light switch location-Isuzu transaxles

 
label.common.footer.alt.autozoneLogo