REMOVAL & INSTALLATION
See Figure 1
- Disconnect the negative battery cable.
- Remove the air cleaner assembly.
- Tag and disconnect the vacuum hoses.
- Unfasten the tube module assembly attaching screws, then remove the tube module and gasket. Discard the gasket. Clean the gasket mating surfaces.
- Using a new gasket, install the tube module assembly. Apply Loctite 26 or equivalent to the retaining screws, then install them and tighten to 27 inch lbs. (3.0 Nm).
- Attach the vacuum hoses as tagged during removal.
- Install the air cleaner assembly.
- Connect the negative battery cable.