GM Lumina/Grand Prix/Cutlass Supreme/Regal 1988-1996

Cruise Control Module

Print

REMOVAL & INSTALLATION



1988-93 Vehicles
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the driver side sound insulation panel.
  4.  
  5. Detach the connector from the module, located on a bracket on the brake pedal bracket/column support.
  6.  
  7. Unfasten the retaining screw and remove the module.
  8.  
  9. The installation is the reverse of the removal procedure.
  10.  
  11. Connect the negative battery cable and check the cruise control system for proper operation.
  12.  

1994-64 VEhicles

See Figures 1, 2, 3 and 4



Click image to see an enlarged view

Fig. Fig. 1: Cruise control module location and mounting-1996 vehicle shown



Click image to see an enlarged view

Fig. Fig. 2: Cruise control cable attachment to the module



Click image to see an enlarged view

Fig. Fig. 3: Cruise control cable adjuster lock-1996 3.1L and 3.4L engines shown



Click image to see an enlarged view

Fig. Fig. 4: Cruise control cable adjuster lock-1996 3.8L engine shown

The cruise control module is mounted on the left shock tower in the engine compartment.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the cruise control cable at the engine bracket and throttle body cam.
  4.  
  5. Disconnect the cruise control cable from the module.
  6.  
  7. Detach the module electrical connector.
  8.  
  9. Unfasten the three nuts from the mounting studs, then remove the module.
  10.  

To install:
  1. Position the module on the mounting studs and install the three retaining nuts. Tighten the nuts to 18 inch lbs. (2 Nm).
  2.  
  3. Attach the electrical connector to the module.
  4.  
  5. Connect the cruise control cable to the module.
  6.  
  7. Fasten the cruise control cable to the engine bracket and throttle body cam.
  8.  
  9. Adjust the cruise control cable as follows:
    1. Disengage the adjustment lock on the cruise control cable (the cable will move freely in and out of the adjuster when the lock is disengaged).
    2.  
    3. Hold the throttle at the closed position.
    4.  
    5. Engage the adjustment lock.
    6.  

  10.  
  11. Connect the negative battery cable and check the cruise control system for proper operation.
  12.  

 
label.common.footer.alt.autozoneLogo