GM Lumina/Grand Prix/Cutlass Supreme/Regal 1988-1996

Head Rest

Print

REMOVAL & INSTALLATION



  1. Raise the head rest to the full-up position.
  2.  
  3. Insert the spring clip release tool down into the left head rest shaft.
  4.  
  5. Push the head rest and tool down at the same time to disengage the detent from the tab.
  6.  
  7. Lift the head rest out after the detent has been released.
  8.  

To install:
  1. Install the shafts into the guides.
  2.  
  3. Push the head rest into the full-down position.
  4.  
  5. Raise the head rest to ensure the detent is properly seated.
  6.  

 
label.common.footer.alt.autozoneLogo