GM Lumina/Grand Prix/Cutlass Supreme/Regal 1988-1996

Headliner

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the retaining screws and remove the sun visors.
  4.  
  5. Carefully pry OFF the dome light lens and remove the revealed nuts to remove the assembly from the roof.
  6.  
  7. Remove the center high mounted stop lamp assembly.
  8.  
  9. Remove the windshield side upper garnish, upper quarter trim panels, and center pillar trim panels.
  10.  
  11. To remove the headliner, separate the hook and loop material until the entire headliner is loose. Then remove through the passenger door.
  12.  

To install:
  1. Load the headliner into the car. Be sure not to bend the preshaped headliner or it will permanently crease! Install the headliner by aligning the sun visor installation holes and engaging the front hook and loop material.
  2.  
  3. Engage the rear and center hook and loop fasteners.
  4.  
  5. Install the center pillar trim panels, upper quarter trim panels, and windshield side upper garnish.
  6.  
  7. Install the center high mounted stop lamp assembly.
  8.  
  9. Install the dome light assembly.
  10.  
  11. Install the sun visors.
  12.  

 
label.common.footer.alt.autozoneLogo