GM Lumina/Grand Prix/Cutlass Supreme/Regal 1988-1996

Air Cleaner

Print

INSTALLATION



See Figures 1 through 8

  1. Unfasten the bolts/screws, wing nut(s) or retaining clips, then remove the air cleaner cover.
  2.  
  3. Lift the air cleaner element from the housing.
  4.  
  5. Clean the air cleaner housing to remove any remaining dirt. Inspect the element for dirt, dust and/or water and replace if necessary.
  6.  

To install:
  1. Position a new element in the air cleaner housing.
  2.  
  3. Place the cover on the housing, then secure using the bolts/screws, wing nut(s) or retaining clips.
  4.  



Click image to see an enlarged view

Fig. Fig. 1: On this 3.1L engine, unfasten the retaining screws...



Click image to see an enlarged view

Fig. Fig. 2: ... then lift the lid and remove the air cleaner element



Click image to see an enlarged view

Fig. Fig. 3: The air cleaner assembly cover on the 2.3L engine is secured by two hold-down fasteners



Click image to see an enlarged view

Fig. Fig. 4: Air cleaner assembly and related components-2.2L engine



Click image to see an enlarged view

Fig. Fig. 5: For the 2.5L engine, unfasten the wing-nut, remove the cover, then lift the air cleaner element from the housing



Click image to see an enlarged view

Fig. Fig. 6: The cover on the 3.1L engine is fastened using retaining screws



Click image to see an enlarged view

Fig. Fig. 7: Exploded view of the air cleaner assembly and related components on the 3.4L engine



Click image to see an enlarged view

Fig. Fig. 8: Air cleaner assembly mounting-3.8L engine

 
label.common.footer.alt.autozoneLogo