GM Lumina/Grand Prix/Cutlass Supreme/Regal 1988-1996

Windshield Washer Fluid Reservoir

Print

REMOVAL & INSTALLATION



See Figures 1, 2 and 3

  1. Disconnect the negative battery cable.
  2.  
  3. Siphon the washer fluid from the reservoir.
  4.  
  5. Unfasten the reservoir mounting screws.
  6.  
  7. Detach the washer motor electrical connector and washer hose.
  8.  
  9. Remove the assembly from the engine compartment.
  10.  

To install:
  1. The installation is the reverse of the removal procedure.
  2.  
  3. Fill the reservoir with a suitable washer fluid.
  4.  
  5. Connect the negative battery cable and check the washer for proper operation.
  6.  



Click image to see an enlarged view

Fig. Fig. 1: Location of the windshield washer fluid reservoir-1996 3.4L engine shown



Click image to see an enlarged view

Fig. Fig. 2: After installing the reservoir, remove the cap...



Click image to see an enlarged view

Fig. Fig. 3: ... then fill the reservoir with the proper type and amount of windshield washer fluid

 
label.common.footer.alt.autozoneLogo