GM Lumina/Silhouette/Transport APVs 1990-1999 Repair Guide

ABS Enable Relay

Print

The ABS enable relay is a normally open contact type, and has special contact material to handle the high currents required for ABS operation.

REMOVAL AND INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the relay cover, then unplug and remove the ABS enable relay.
  4.  

See Figure 1

Click image to see an enlarged view

Fig. Fig. 1: The ABS enable relay is located in the engine compartment

To install:
  1. Plug in the new relay; replace the cover.
  2.  
  3. Connect the negative battery cable.
  4.  

 
label.common.footer.alt.autozoneLogo