GM Lumina/Silhouette/Transport APVs 1990-1999 Repair Guide

Flashers

Print

REPLACEMENT



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the sound insulator panel.
  4.  
  5. Remove the I/P steering column opening filler from the I/P lower trim pad by disengaging the four upper clips.
  6.  
  7. Remove the turn signal flasher from the retaining clip and unplug it.
  8.  

To install:
  1. Installation is the reverse of removal.
  2.  

The hazard flasher is mounted in the convenience center. The convenience center is located behind the glove compartment. The repair procedure is the same as the T/S flasher.

See Figures 1 and 2

Click image to see an enlarged view

Fig. Fig. 1: The turn signal flasher is serviceable by removing the trim panels under the steering column.



Click image to see an enlarged view

Fig. Fig. 2: The hazard flasher is serviceable by removing the right side trim panels.

 
label.common.footer.alt.autozoneLogo