GM Lumina/Silhouette/Transport APVs 1990-1999 Repair Guide

Fender

Print

REMOVAL AND INSTALLATION



  1. Open and properly support the hood.
  2.  
  3. Disconnect the side marker lamp wiring. Remove the side marker lamp.
  4.  
  5. Unfasten the retainers, then remove the wheel well housing.
  6.  
  7. Remove the fender-to-bumper fascia bolts.
  8.  
  9. Remove the fender to fascia bolt from the lower door hinge pillar.
  10.  
  11. Unfasten the fender attaching screws, then remove the fender.
  12.  

See Figures 1 and 2

Click image to see an enlarged view

Fig. Fig. 1: Exploded view of the fender panel. Note the hood latch support fastener locations



Click image to see an enlarged view

Fig. Fig. 2: This diagram shows common locations of the fender panel hidden hangers

To install:
  1. Reposition the fender and install the attaching screws.
  2.  
  3. Install the fender-to-fascia bolt at the lower door hinge pillar.
  4.  
  5. Install the fender-to-bumper fascia bolts.
  6.  
  7. Install the wheel well housing.
  8.  
  9. Install the side marker lamp assembly and attach the wiring.
  10.  
  11. Close the hood.
  12.  

 
label.common.footer.alt.autozoneLogo