GM Lumina/Silhouette/Transport APVs 1990-1999 Repair Guide

Grille

Print

REMOVAL AND INSTALLATION



These are general procedures; they may vary slightly from vehicle to vehicle depending on year and trim level. Read through both procedures and decide which best fits your vehicle.

Two Piece Grille

  1. Raise and support the hood.
  2.  
  3. Pop out the upper grille.
  4.  
  5. Remove the lower grille-to-fascia screws, then remove the lower grille.
  6.  
  7. Installation is the reverse of the removal procedure.
  8.  

One Piece Grille

  1. Remove the right and left wheel well housing.
  2.  
  3. Remove the right and left fascia-to-fender bolts.
  4.  
  5. Remove the headlights.
  6.  
  7. Remove the right and left headlight frame-to-fascia fasteners, then remove the front fascia.
  8.  
  9. Remove the grille-to-front fascia fasteners, then remove the grille from the vehicle.
  10.  
  11. Installation is the reverse of the removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo