GM Lumina/Silhouette/Transport APVs 1990-1999 Repair Guide

Stabilizer (Sway) Bar

Print

REMOVAL AND INSTALLATION



  1. Raise and safely support the front of the vehicle so that the suspension hangs free.
  2.  
  3. Remove the stabilizer shaft insulator clamp and insulator at the control arms; do not remove the studs from the control arms.
  4.  
  5. Remove the plate from each side of the frame.
  6.  
  7. Remove the stabilizer shaft and insulator bushings.
  8.  

To install:
  1. Install the insulator bushings to the stabilizer shaft.
  2.  
  3. Install the stabilizer shaft and insulator bushings to the frame.
  4.  
  5. Install the plate to each side of the frame and tighten the bolts to 40 ft. lbs. (55 Nm).
  6.  
  7. Install the insulator clamp to the control arms and tighten the nuts to 33 ft. lbs. (45 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo