GM Malibu/Cutlass 1997-2000

Brake Fluid Level Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Detach the electrical connector from the fluid level switch.
  4.  
  5. Using needle-nose pliers, compress the switch locking tabs at the inboard side of the master cylinder reservoir and remove the switch.
  6.  



Click image to see an enlarged view

Fig. The fluid level switch (2) is mounted in the master cylinder reservoir (1)



Click image to see an enlarged view

Fig. Remove the switch using needle-nose pliers to compress the switch locking tabs

To install:

  1. Press the fluid level switch into the master cylinder reservoir until it snaps into place.
  2.  
  3. Attach the switch electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo