GM Malibu/Cutlass 1997-2000

Front Bumper

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. Remove the retainers (2 & 5) from the top and bottom of the fascia (4). Remove the lamps from the sidemarkers, then remove the fascia (4) from the impact bar (6)-Malibu shown, Cutlass similar

  1. Remove the front fascia, as follows:
    1. Remove the right and left splash shields.
    2.  
    3. Unfasten the fender-to-fascia retaining bolts.
    4.  
    5. Remove the retainers from the top and bottom of the fascia.
    6.  
    7. Remove the lamps from the sidemarkers.
    8.  
    9. Separate the fascia from the impact bar.
    10.  

  2.  
  3. Remove the energy absorber and the impact bar from the vehicle.
  4.  
  5. Installation is the reverse of the removal procedure. However, tighten the impact bar retaining nuts to 20 ft. lbs. (27 Nm).
  6.  

 
label.common.footer.alt.autozoneLogo