GM Malibu/Cutlass 1997-2000

Blower Motor

Print

REMOVAL & INSTALLATION





Click image to see an enlarged view

Fig. View of the blower motor, which is located near the Body Function Controller (BFC)

The blower motor and fan are serviced as an assembly only.

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the passenger side sound insulator.
  4.  
  5. Move the Body Function Controller (BFC) aside.
  6.  
  7. Detach the electrical connections from the blower motor.
  8.  
  9. Remove the blower motor retaining screws, then remove blower motor and fan assembly.
  10.  

To install:

  1. Install blower motor and fan assembly, then secure using the retaining screws. Tighten to 45 inch lbs. (5 Nm).
  2.  
  3. Attach the electrical connectors to the blower motor.
  4.  
  5. Install the BFC into position.
  6.  
  7. Install the right side sound insulator.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo